• You've just added this product to the cart:

    CEM- DT- 903 Socket Polarity and Earth Leakage Tester

    0 out of 5

    CEM- DT- 903 Socket Polarity and Earth Leakage Tester

          PRODUCT FEATURES:

    • The appearance of the socket design, greatly expanded the scope of its Without power to support the use of more convenientOperating
    • Temperature: 0 C  – 40 C,
    • The level of contamination: 2
    • By type of protection:IP40 .

         DOWNLOAD PDF FILE

  • You've just added this product to the cart:

    HIOKI 3283-20 Clamp On Leak Hitester

    0 out of 5

    HIOKI 3283-20 Clamp On Leak Hitester

          PRODUCT FEATURES:

    • measure leak current using highly sensitive 10uA resolution (at 10.00 mA range)
    • Indicate 50/60 Hz leak current components with the filtering function
    • Monitor leak current conditions in combination with a Memory HiCorder (monitor output, Model 3283 only)
    • 3283-20: EN 61010-2-032:2012 Type A to measure uninsulated hazardous live conductors such as busbars .

       DOWNLOAD PDF FILE

  • You've just added this product to the cart:

    HIOKI 3293-50 Clamp On Leak Hitester

    0 out of 5

    HIOKI 3293-50 Clamp On Leak Hitester

         PRODUCT FEATURES:

    • Measure for leakage current and load all with the same device
    • Innovative flip clamp design
    • Flip display to see measurement readings from any angle
    • 1mA to 1000A accuracy guaranteed
    • 6 ranges and bar graph display
    • Measure and display only the leakage current of commercial frequency components using the filter function .

         DOWNLOAD PDF FILE

  • You've just added this product to the cart:

    MOTWANI DCM-10A Digital Clamp Meter

    0 out of 5

    MOTWANI DCM-10A Digital Clamp Meter

        PRODUCT FEATURES:

    • 0.01 mA resolution for measuring earth leakage currents.
    • 300 A range for standard current
    • Measurements, Analogue Bargraph Display
    • For trending. Pocket sized and lightweight
    • Jaw size 40mm

         DOWNLOAD PDF FILE

  • You've just added this product to the cart:

    LUTRON DL-6054 ACA Leakage Tester

    LUTRON DL-6054 ACA Leakage Tester
    LUTRON DL-6054 ACA Leakage Tester
    0 out of 5

    LUTRON DL-6054 ACA Leakage Tester

    PRODUCT FEATURES :

    • High precision AC mA measurement, it is useful for AC mA leakage current measurement.
    • Measure AC mA on the inductive conductor.
    • Miniature type, easy to carry out & operation.
    • High precision for low ACA leakage current measurement.
    • Built-in DATA HOLD function.
    • Crystal time base, high quality.
    • LCD display allows clear readout-out even at high ambient light level.
    • LSI circuit provides high reliability and durability.
    • Overload protection circuit is provided for all range.
    • Design to meet IEC 1010 safety requirement.
    • Compact, light weight and excellent operation.
    • Measurement:200 AC mA/20ACA/200A
    • Overload Circuit Protection : 300 ACA max. ( within 1 minute for 20A, 200A range ).
    • Zero adjustment Automatic adjustment.
    • Over input Display shows ‘1’.
    • Sampling Time Approx. 0.4 second.
    • Operating Temp. 0 to 50 ℃ ( 32 to 122 ℉ ).
    • Operating Humidity Less than 80% RH.

    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2412 Leakage Clamp Tester

    Kyoritsu 2412 Leakage Clamp Tester
    Kyoritsu 2412 Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2412 Leakage Clamp Tester

    PRODUCT FEATURES :

    • Kyoritsu 2412 is specially designed for Leakage Current Measurement.
    • AC A (50/60Hz): 20/200mA/2/20/200/500A
    • AC A (WIDE): 20/200mA/2/20/200/500A
    • AC Voltage: 600V
    • Resistance: 200Ω
    • Conductor size: Ø40mm max.
    • Frequency response: 40 – 400Hz
    • Effect of external stray magnetic field φ15mm 100A – 10mA AC max.
    • Output Recorder : DC200mV against the maximum value of each range (500A range is 50mV)
    • Power source: 6F22 (9V) × 1 or AC Adaptor

    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2413F Leakage Tester

    Kyoritsu 2413F Leakage Tester
    Kyoritsu 2413F Leakage Tester
    0 out of 5

    Kyoritsu 2413F Leakage Tester

    PRODUCT FEATURES :

    • Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement. Frequency filter switch to eliminate the effect of harmonics.
    • Output terminal.
    • Resolution 0.1mA.
    • AC A (50/60Hz): 200mA/2/20/200A/1000A
    • AC A (WIDE): 200mA/2/20/200/1000A
    • Conductor size: Ø68mm max.
    • Frequency response: 40Hz – 1kHz
    • Output Waveform : AC200mV against the maximum value of each range (1000A range is 100mV)
    • Recorder : DC200mV against the maximum value of each range (1000A range is 100mV)

    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2413R Leakage Clamp Tester

    Kyoritsu 2413R Leakage Clamp Tester
    Kyoritsu 2413R Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2413R Leakage Clamp Tester

    PRODUCT FEATURES :

    • Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
    • True RMS enables an accurate measurement for distorted waveforms.
    • Measurement from mA up to AC 1000A.
    • Frequency filter switch to eliminate the effect of the harmonics.
    • 2 way analogue output terminal.
    • AC A (50/60Hz): 200mA/2/20/200/1000A
    • AC A (WIDE): 200mA/2/20/200/1000A
    • Crest factor: 3.0 or less
    • Conductor size: Ø68mm max.
    • Frequency response: 40Hz – 1kHz
    • Output Waveform : AC200mV against the maximum value of each range (1000A range is 100mV) , Recorder : DC200mV against the maximum value of each range (1000A range is 100mV)
  • You've just added this product to the cart:

    Kyoritsu 2431 Leakage Clamp Tester

    Kyoritsu 2431 Leakage Clamp Tester
    Kyoritsu 2431 Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2431 Leakage Clamp Tester

    PRODUCT FEATURES :

    • Frequency Selector Switch to eliminate the effect of harmonics.
    • Three AC current ranges 20mA/200mA/200A.
    • Rotary switch for easy one finger power-on and range selection.
    • AC A (50/60Hz): 20/200mA/200A
    • AC A (WIDE): 20/200mA/200A
    • Conductor size: Ø24mm max.
    • Frequency response: 40 – 400Hz
    • Effect of external stray magnetic field φ15mm 100A: 10mA AC max.
    • Safety Standard: IEC 61010-1 CAT III 300V , IEC 61010-2-032

     
    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2432 Leakage Clamp Tester

    Kyoritsu 2432 Leakage Clamp Tester
    Kyoritsu 2432 Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2432 Leakage Clamp Tester

    PRODUCT FEATURES :

    • High Sensitive Model
    • Frequency Selector Switch to eliminate the effect of harmonics.
    • Three AC current ranges:4mA/40mA/100A.
    • AC A (50/60Hz): 4/40mA/100A
    • AC A (WIDE): 4/40mA/100A
    • Maximum circuit voltage: 600V AC/DC (between line/neutral), 600V AC/DC(between line/neutral)
    • Conductor size: Ø40mm max.
    • Frequency response:20Hz – 1kHz(40Hz -1kHz:100A)
    • Effect of External Stray Magnetic Field: 2mA AC approx. in proximity to a 15mm-dia conductor carrying 100A AC.
    • Response Time: Approx. 2 seconds

    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2433 Leakage Clamp Tester

    Kyoritsu 2433 Leakage Clamp Tester
    Kyoritsu 2433 Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2433 Leakage Clamp Tester

    PRODUCT FEATURES :

    • Frequency Selector Switch to eliminate the effect of harmonics.
    • Three AC current ranges:40mA/400mA/400A.
    • AC A (50/60Hz): 40/400mA/400A
    • AC A (WIDE): 40/400mA/400A
    • Maximum circuit voltage: 600V AC/DC (between line/neutral), 300V AC/DC (against earth)
    • Conductor size: Ø40mm max.
    • Frequency response:20Hz – 1kHz(40Hz -1kHz:400A)
    • Response Time: Approx. 2 seconds
    • Effect of External Stray Magnetic Field: 10mA AC approx. in proximity to a 15mm-dia conductor carrying 100A AC.

     
    Download PDF

  • You've just added this product to the cart:

    Kyoritsu 2433R Leakage Clamp Tester

    Kyoritsu 2433R Leakage Clamp Tester
    Kyoritsu 2433R Leakage Clamp Tester
    0 out of 5

    Kyoritsu 2433R Leakage Clamp Tester

    PRODUCT FEATURES :

    • True RMS Measurement.
    • Frequency Selector Switch to eliminate the effect of harmonics.
    • Three AC current ranges:40mA/400mA/400A.
    • AC A (50/60Hz): 40/400mA/400A
    • AC A (WIDE): 40/400mA/400A
    • Maximum circuit voltage: 600V AC/DC (between line/neutral), 300V AC/DC (against earth)
    • Conductor size: Ø40mm max.
    • Frequency response: 20Hz – 1kHz[40Hz-1kHz:400A]
    • Effect of External Stray Magnetic Field: 10mA AC approx. in proximity to a 15mm-dia conductor carrying 100A AC.
    • Response Time: Approx. 2 seconds
Measure Current Please mention the Model Number in your message.
Send