-
LUTRON DT-2239A
PRODUCT FEATURES :
- DISPLAY: 0.3″ LED , 4 DIGITS
- 100 TO 10000 FLASHES PER MINUTE(FPM)
- FLASH TUBE : XENON LAMP
- SAMPLING TIME : 1 SECOND
-
METREL 2492
PRODUCT FEATURES :
-
METREL 2592
PRODUCT FEATURES :
-
KEW 6315-03 Power Quality Analyzer
PRODUCT FEATURES :
- Simultaneous Power & Power quality measurements
- Helpful support functions
- Measurement with high accuracy
- Remote monitoring on PC and Android device
- Various Clamp Current Sensors
- Energy consumption check on site
- IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V
- True RMS
- Wiring connections: 1P2W, 1P3W, 3P3W, 3P4W
- Measurements and parameters: Voltage, Current, Frequency, Active power, Reactive power, Apparent power,Active energy, Reactive energy, Apparent energy, Power factor (cos θ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate), Capacitance calculation for PF correction unit, Flicker
- Voltage RMS Range: 600.0 / 1000V ,
- Display range 0.15 – 130% of each range , Crest factor: 3 or less ,
- Sampling speed of Voltage transient: 24µs
- Current RMS Range: Range: 8128 ( 50A type ) : 5 / 50A / AUTO
- 8127 ( 100A type ) : 10 / 100A / AUTO
- 8126 ( 200A type ) : 20 / 200A / AUTO
- 8125 ( 500A type ) : 50 / 500A / AUTO
- 8124/8130 ( 1000A type ) : 100 / 1000A / AUTO
- 8146/8147/8148 ( 10A type ) : 1 / 10A / AUTO
- 8129 ( 3000A type ) : 300 / 1000 / 3000
- Display range: 0.15 – 130% of each range
- Crest factor: 3 or less
- Active Power: Accuracy ±0.3%rdg±0.2%f.s. + accuracy of clamp sensor: (power factor 1, sine wave, 40 – 70Hz)
- Frequency meter range: 40 – 70Hz
- Power supply (AC Line) AC100 – 240V / 50 – 60Hz / 7VA max
- Internal memory FLASH memory (4MB)
- PC card interface: SD card (2GB)
-
TES 1370 (added JUNE 2009)
PRODUCT FEATURES :
- Measuring Range:CO2: 0-6000 PPM.
- Continuous or manual data logging and reading.
- Data hold & man/min with Time Stamp.
- Alarm & Time Setting.
- Click PDF File for more details.
- CO2: 0-6000 PPM
- TEMP: -20C TO 60C
- HUMIDITY: 10% TO 95%
-
Lutron GCH-2018 CO2 Meter
PRODUCT FEATURES :
- carbon dioxide + Humidity + Temperature + Dew Point
- CO2 range : 0 to 4,000 ppm.
- Resolution: 1 ppm
- Accuracy: ± 40 ppm
- CO2 sensor : NDIR, long term reliability.
- CO2 with alarm setting.
- Temperature Range 0℃ to 50℃ ,32℉ to 122℉
- Humidity Range: 10 % to 95 % R.H.
- Dew Point Range: -25.3℃ to 48.9℃(Range -13.5℉ to 120.1℉)
- Data hold, Record (Max., Min.).
- RS232/USB computer interface.
- High repeatability and high accuracy.
- Separate probe, easy operation and convenient for remote measurement.
- CO2 function with alarm setting
- Humidity measurement with fast response time
- Large S-TN LCD, high contrast, easy readout.
- Records Maximum and Minimum readings with Recall.
- RS232 computer interface
- Circuit: Custom one-chip of microprocessor LSI circuit.
- Units: CO2 ppm, Humidity % RH, Dew point ℃ ℉, Temp. ℃ ℉ .
- Response Time CO2 : < 2 min. typically.
- Humidity/Dew point : 10 to 30 seconds typically
- Automatic temp. compensation.
- Alarm Setting: For CO2 measurement only.
- Display Sampling Time:approx. 1 second
- Memory Recall: Maximum & Minimum value.
- Data Hold: Freeze the display reading
-
You've just added this product to the cart:
HANNA HI 98303 & HI 98304 CONDUCTIVITY METERS
Read MoreQuick ViewHANNA HI 98303 & HI 98304 CONDUCTIVITY METERS
PRODUCT FEATURES :
- Dist Testers are reliable,Pocket sized Instrument.
- Large LCD Display for easy viewing.
- HI 98303 (DIST 3): 1999 uS/cm.
- HI 98304 (DIST 4): 1999 mS/cm.
- One Year Warranty.
- Best Seller.
-
HI 8733
PRODUCT FEATURES :
- Specially designed for use in areas of production and quality control.
- with a built-in temperature sensor and automatic temperature compensation, this is a perfect instrument were Temperature of the solution fluctuates.
- rugged probe for indoor/outdoor measurements.
- RANGE: 0.0 TO 199.9 US/CM, 0 TO 1999US/CM, 0.00 TO 19.99MS/CM, 0.0 TO 199.9MS/CM
-
HI 2300
PRODUCT FEATURES :
- Auto-ranging EC,TDS,NaCl, Temperature meter.
- 4-ring EC probe with internal temperature sensor.
- Automatic(ATC), Manual (MTC) or No Temperature compensation.
- Auto-ranging.
- Good laboratory Practice.
- PC compatible.
-
HANNA HI 98301 TDS Tester
PRODUCT FEATURES :
- TDS Range: 1999 ppm (mg/L)
- TDS Resolution: 1 ppm (mg/L)
- TDS Accuracy: ±2% F.S.
- Calibration: manual, one point
- Temperature Compensation: automatic from 0 to 50°C (32 to 122°F)
- TDS Conversion Factor: 0.5
- Battery Type/Life: 1.5V (4) / approximately 200 hours of continuous use
- Environment: 0 to 50°C (32 to 122°F); RH max 95% non-condensing
- Dimensions:175 x 41 x 23 mm (6.9 x 1.6 x 0.9”)
- Weight 95 g (3.4 oz.)
- Ordering Information: HI98301 (DiST®1) is supplied with protective cap, screwdriver, batteries and instructions.
- An amperometric measurement of TDS is based on Ohm’s Law, I = V/R, where R depends on the distance between two pins and their surface.
-
Testo 511
PRODUCT FEATURES :
- Testo’s 511 measures absolute pressure with an accuracy of +/-3 hPa.
- Pressure Measuring Range 300hPa to 1200hPa
- Resolution (in H2O) 0.1
- Operating Temperature Range 0°C to +50°C
- units: hPa,mbar,Pa,mmH2O,mmHg,inH2O,inHg,psi,m,ft
- Absolute pressure accuracy ±3mbar
- Barometric altitude measurement
- 8 AVAILABLE PRESSURE UNITS
- CALCULATION OF BAROMETRIC AIR PRESSURE
- DISPLAY ILLUMINATION
-
Testo 510 Digital Manometer
PRODUCT FEATURES :
- The testo 510 digital manomenter is an all in one, low pressure measurement solution.The 510 can measure total external static pressure, differential pressure, duct velocities, manifold pressures, and air flow with pito tube (optional).
- Temperature and air density compensation for accurate airflow measurements
- Measures differential pressure to 40 in H2O
- Backlit display ensure easy readability in low light situations
- Temperature compensated pressure sensor
- Measuring range: 0 to 40 In H₂O / 0 to 100 hPa
- Resolution: 0.00 In H₂O / 0.01 hPa
- Seceltable units: hPa, mbar, Pa, mmH2O, inH₂O, inHg, mmHg, psi, m/s, fpm
- Maximal static pressure: 7.3 psi / 500 mbar
- Measuring rate: 0.5 sec
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
FREE SHIPPING
For all those who like our FB page.FIVE STAR RATING
Rated 5 Star by our customers.ONLINE SUPPORT
Online Support Available.
- About Us
- Contact Us
